Skip to content

Range Rover · L322 · 2002–2012

Range Rover (L322) ride height sensors

Suspension ride height sensors and linkages for Land Rover air suspension and adaptive headlights.

WhatsApp your VIN
Ride Height Sensors for the Range Rover (L322)

Matching ride height sensors to a Range Rover (L322)

The Range Rover (L322) (2002–2012) was sold here with 3 different engines. Gearbox: ZF automatic; GM five-speed automatic (earlier vehicles). Send the VIN and engine number with your enquiry so the parts team can confirm the correct ride height sensors before quoting.

Related Range Rover (L322) faults

  • Air suspension faults. Compressors, valves, reservoirs, height sensors and complete struts all fail on the L322, usually shown by a suspension warning on the dash.

Know the part

Understanding Range Rover (L322) Ride Height Sensors

Ride height sensors measure how high each corner of the vehicle sits. They are small rotary sensors mounted to the body with a linkage arm to the suspension. The air suspension module uses their readings to raise, lower and level the vehicle, and on some models the same sensors help with headlight levelling.

Sensors fail through age, water getting into the connector, or a bent or broken linkage after off-road driving. A faulty sensor can make the system think a corner is too high or too low and produce odd ride heights or a suspension fault.

Further reading

Common Questions About Range Rover (L322) ride height sensors

How do I know if a ride height sensor is faulty?

A diagnostic tool can show the live reading from each sensor. Compare it with the real height as the suspension moves. A reading that jumps, stays fixed or is out of range points to the sensor, its linkage or its wiring.

Do new height sensors need calibration?

Yes. After fitting a new sensor, calibrate the suspension ride heights with a diagnostic tool so the module has the correct reference.

Can a bent linkage cause a suspension fault?

Yes. A bent linkage gives a wrong reading even if the sensor itself is fine. Check the linkage, particularly after off-road driving, before replacing the sensor.

Are front and rear height sensors the same?

Often not. Sensors can differ by position and side, so give the corner and the VIN when ordering.

Not sure which part fits?

Share your VIN or engine code and the parts team will check the correct part for your Range Rover (L322).

Call 031 943 9999