Range Rover · L322 · 2002–2012
Range Rover (L322) pinion gear
Differential pinions, pinion bearings and pinion seals for Land Rover axles.
Matching pinion gear to a Range Rover (L322)
The Range Rover (L322) (2002–2012) was sold here with 3 different engines. Gearbox: ZF automatic; GM five-speed automatic (earlier vehicles). Send the VIN and engine number with your enquiry so the parts team can confirm the correct pinion gear before quoting.
Know the part
Understanding Range Rover (L322) Pinion Gear
The pinion is the small gear at the front of the differential that takes drive from the propshaft and turns the crown wheel. It runs on pinion bearings and is sealed where the propshaft flange connects.
Pinion seals leak with age, heat and after water crossings, and worn pinion bearings cause whine and play at the propshaft flange. A pinion itself is only replaced together with its matched crown wheel.
Further reading
- Differential (mechanical device) – Wikipedia
Background on pinion and crown wheel operation.
Common Questions About Range Rover (L322) pinion gear
Is a leaking pinion seal urgent?
A slow weep can be monitored, but a steady leak will lower the oil level and damage the bearings and gears. Top up and repair it promptly.
Can I replace a pinion seal without rebuilding the diff?
Yes, but the pinion nut must be refitted correctly to keep the bearing preload right. Follow the procedure for your axle, as some designs use a crush sleeve.
Can I buy just the pinion gear?
No. The pinion is matched to its crown wheel and must be replaced as a set.
What should I send to order pinion parts?
The VIN, which axle, and the ratio if known.
Other Range Rover (L322) transmission
Not sure which part fits?
Share your VIN or engine code and the parts team will check the correct part for your Range Rover (L322).